Bialetti SUPER CF69 Instructions D'emploi page 55

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

B)
Fill the tank with cold water up to the MAX level.
Press On/Off button (4) to switch the machine on.
C)
D)
Make sure the machines does not contain any capsule. If needed,
open and close the lever (7).
Position a suitable cup on the apposite rack and start the cleaning
E)
mode pressing the espresso coffee push button (5) and the long
coffee one (6) at the same time for 5 secs.
DURING CLEANING MODE, FOR ABOUT ONE MINUTE,
THE MACHINE DISPENSES WATER INTERMITTENTLY
IN ORDER TO CLEAN AND RINSE THE INNER CIRCUITS
O F T H E M A C H I N E D E E P L Y. A F T E R O N E M I N U T E,
DISPENSING IS CONTINUOUS AGAIN. DURING THIS
ENTIRE CYCLE, THE LIGHTS OF THE TWO POURING
PUSH BUTTONS AND THE LIGHT OF THE ON/OFF
BUTTON WILL BLINK IN GREEN.
F)
Stop the cleaning mode by pressing one of the three buttons, when
water reaches about half of the tank capacity.
G)
Let the descaling agent act for aprox.ly 15-20 minutes with the
machine off.
Switch the machine on and carry out again the operations described
H)
in point E) until the tank is completely empty.
I)
Leave the machine off for approx.ly 5 minutes.
Remove the tank and rinse it thoroughly with clean cold water.
J)
K)
Fill the tank with clean water up to the "MAX" level and insert it in
its seat.
Start the cleaning mode pressing the espresso coffee push button
L)
(5) and the long coffee one (6) at the same time for 5 secs until
the tank is completely empty. If necessary, start the cleaning
mode several times (the machine features a safety system, which
interrupts dispensing automatically after having dispensed 0.7 l of
liquid consecutively).
M)
Carry out the operations described in point L).
8. Maintenance
EN
55

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

012690030/sc012690010/sc

Table des Matières