Mounting The Bike Handle - Stihl FS 300 Notice D'emploi

English
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
For safety reasons only the
cutting attachment and deflectors
or limit stops shown in each row of
the table may be used together.
No other combinations are
permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
1)
3 STIHL AutoCut 40-4
4 STIHL TrimCut 41-2
5 STIHL PolyCut 40-3
Metal cutting attachments
6 Grass cutting blade 230-4
7 Grass cutting blade 255-8
8 Grass cutting blade 250-40 Spezial
9 Brush knife 305-2 Spezial
10 Brush knife 300-3
11 Shredder blade 270-2
12 Scratcher tooth circular
saw blade 200
13 Chisel tooth circular saw blade 200
14 Scratcher tooth circular
2)
saw blade 225
15 Chisel tooth circular
2)
saw blade 225
16 Carbide tipped circular
2)
saw blade 225
12
Non-metal grass cutting blades,
brush knives, shredder blades
and circular saw blades are not
approved.
Deflectors, limit stops
Deflectors
17 Deflectoronly for mowing heads
18 Deflector with
19 Skirt and blade for mowing heads
(see "Mounting the Deflector").
20 Deflector without skirt and blade for
mowing tools 6 to 10
21 Deflector for shredder blade
Limit stops
22 Limit stop for circular
saw blades 200
23 Limit stop for circular
saw blades 225
Harnesses
24 Full harness must be used
25 Deluxe full harness
1)
for FS 450, 480 only
2)
for FS 400, 450, 480 only

Mounting the Bike Handle

N
Hold the lower clamp (1) steady.
N Unscrew and remove the clamping
screw (2). The clamps are loose
once the clamping screw has been
removed.
N Remove the upper clamp (3) from
the lower clamp.
FS 300, FS 350, FS 400, FS 450, FS 480
2
3
1