Setting The Remote Start; Setting The Remote Control; Remote Diagnostics - Thermador Pro Grand Professional Serie Mode D'emploi

Connecting to the network
1. Press SETTINGS to cycle through available options
until "HOME CONNECT SETTINGS" is displayed.
2. Press ENTER.
"PRESS ENTER FOR HC" is displayed.
3. Press ENTER to start the Home Connect assistant.
4. Follow the instructions in the sections
• "Manually registering your appliance in the home
network", or
• "Connect your appliance to your home network
with WPS".
Connecting to app
If the Home Connect app is installed on your mobile
device, you can connect it to your oven.
Requirement: The appliance is connected to the network.
1. Press SETTINGS to cycle through available options
until "HOME CONNECT SETTINGS" is displayed.
2. Press ENTER.
"PRESS ENTER FOR HC" is displayed.
3. Press SETTINGS to cycle through available options
until "CONNECT TO HC APP" is displayed.
4. Press ENTER.
"CONFIRM ON HC APP" is displayed.
5. Confirm the connection on your Home Connect app.

Setting the remote start

See "Setting remote start" on page 22.

Setting the remote control

1. Press SETTINGS to cycle through available options
until "HOME CONNECT SETTINGS" is displayed.
2. Press ENTER.
"PRESS ENTER FOR HC" is displayed.
3. Press SETTINGS to cycle through available options
until "REMOTE CTRL DISABLED" or "REMOTE CTRL
ENABLED" is displayed.
4. Press ENTER.
"PRESS 1 REMOTE CTRL ON" or "PRESS 0 REMOTE
CTRL OFF" is displayed.
5. Press 1 or 0 to switch remote control on or off.

Remote diagnostics

Customer Support can access your appliance via Remote
Diagnostics if you ask them to do so, if your appliance is
connected to the Home Connect server, and if Remote
Diagnostics is available in the country where you are using
the appliance.
Tip: Further information and details about the availability
of remote diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
27