Unpacking, Moving, And Setting The Rangetop - Thermador Professional Serie Installation

Side View of Rangetop
26¾" (680) 26¾" (680)
7 / 8 " 7 / 8 "
(22) (22)
Cabinet face for installation with
projecting control panel.
22½" (573) 22½" (573)
Cabinet face for installation
with flush control panel.
Projecting from Cabinet Front
inches (mm)
/ / " " (18)
11 11
(18)
16 16
Notch Depth Notch Depth
Front projects outward 13/16" (20) as
shown from standard 24" deep base.
Installation of rangetop above Thermador warming drawers
7 5 / 8 " 7 5 / 8 "
(194) (194)
Plywood support
Install additional
wood support along
front edge of cutout
inches (mm)
Page. 11
½" (12.7) ½" (12.7)
side flange side flange
7 5 / 8 " 7 5 / 8 "
(194) (194)
1½"
(38)
inches (mm)
13 /
" (20)
16
2¾" (70)
min. between
cutouts
Gas inlet location
A manual valve must be installed external to the
appliance, in an accessible location from the front, for the
purpose of shutting off the gas supply.
Gas Inlet Location
From left side to
centerline of gas inlet
From rear to centerline of
gas inlet
inches (mm)
Unpacking, Moving, and
Setting the Rangetop
CAUTION
Proper equipment and adequate manpower
must be used in moving the appliance to avoid
damage and/or personal injury. The unit is heavy
and should be handled accordingly.
Hidden surfaces may have sharp edges. Use
caution when handling the appliance. Failure to
do so may result in property damage or personal
injury.
1. Verify that the appliance is correct for the type of gas
being provided.
2. Remove the outer carton and packing material from
the shipping base. Ensure that you have all rangetop
components before proceeding.
3. Remove the cooking grates, griddle plate (if
applicable), and burner caps to reduce the rangetop's
weight.
30'' 36'' 48''
6-3/8'' 11" (267 mm)
(152 mm)
2¼'' (54 mm)
½" (12.7) NPT ½" (12.7) NPT
¾" (19) ex line ¾" (19) ex line