Thermador Professional Serie Installation page 10

Clearance requirements with OTR –
PCG305 ONLY
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 6'' (152 mm) should be approved by the local codes and/or by the local authority having
jurisdiction.
• 30" (762 mm) minimum to non-combustible material
above the Cooking Surface.
Page. 9
* Refer to OTR manufacturer's installation manual for
clearances.
inches (mm)