Safety; Important Safety Instructions - Thermador Professional Serie Installation

Safety

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS
INSTALLER: Save these Instructions for the Local Gas
Inspector's use. Please leave these Installation Instructions
with this unit for the owner. Show the owner the location
of the circuit breaker or fuse. Mark it for easy reference.
OWNER: Please retain these instructions for future
reference. Before using your appliance, be sure to read
this manual.
WARNING
If the information in this manual is not
followed exactly, a fire or explosion may
result causing property damage,
personal injury or death.
-- DO NOT store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS
• DO NOT try to light any appliance.
• DO NOT touch any electrical switch.
• DO NOT use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
-- Installation and service must be performed
by a qualified installer, service agency or the
gas supplier.
WARNING
ELECTRICAL SHOCK HAZARD
• Disconnect power before installing or
servicing. Before turning power ON, be sure
that all controls are in the OFF position.
• DO NOT remove connections.
• DO NOT use an extension cord.
• Improper grounding can result in a risk of
electric shock.
• Failure to follow these instructions can result
in death, fire, or electrical shock.
Page. 3
Local codes vary. Installer is responsible for ensuring that
the installation, gas connections, and grounding comply
with all applicable codes. Failure to follow appropriate
local codes and regulations may void the warranty.
The installation of appliances designed for manufactured
(mobile) home installation must conform with the
Manufactured Home Construction and Safety Standard,
Title 24 CFR, Part 3280 [formerly the Federal Standard for
Mobile Home Construction and Safety, Title 24, HUD {Part
280}] or with local codes where applicable.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
Remove all tape and packaging before using the
appliance. Dispose of packaging in an environmentally-
responsible manner. Never allow children to play with
packaging material.
This appliance must be grounded. Grounding reduces the
risk of electric shock by providing a safe pathway for
electric current in the event of a short circuit.
The appliance, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code,
NFPA 70 latest edition, or the Canadian Electric Code,
CSA C22.1-02.
DO NOT install this appliance outdoors.
For Massachusetts Installations:
• Installation must be performed by a qualified or
licensed contractor, plumber or gas fitter qualified or
licensed by the state, province or region where this
appliance is being installed.
• Shut-off valve must be a "T" handle gas cock.
• Flexible gas connector must not be longer than 36''
(914 mm).
Verify the type of gas supplied to the location. Ensure that
the appliance is connected to the type of gas for which it
is certified.
This appliance is capable of being safely placed in
operation in the event of a power failure. Only the
standard top burners can be manually lit.