Care And Maintenance; Setting The Oven To Self-Clean - Thermador Pro Grand Professional Serie Mode D'emploi

Masquer les pouces Voir aussi pour Pro Grand Professional Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and maintenance

This guide covers several models. Your model may not
have all of the modes listed.
For more cleaning recommendations and tips to get the
most out of your appliance, refer to the website at
www.thermador.com/us/support/customer-care/faqs/
gas-ranges.

Setting the oven to self-clean

9 WARNING
During the self-clean cycle, exterior surfaces may
become hotter than usual. Parts of the appliance may
become potentially harmful to children, and to
persons who lack adult knowledge of appliances and
lack adult reactions to potentially harmful conditions.
Keep these individuals away during self-clean and
while the appliance is in use. Care is needed when
using other functions.
The elimination of soil during self-cleaning may
facilitate the emission of small amounts of chemicals
or other substances that may be harmful upon
sufficient exposure. To minimize exposure to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.
For the self-cleaning cycle of your range, remove small
animals and birds from the kitchen and surrounding
areas. Open a nearby window for additional
ventilation. During self-clean, fumes are released that
may be harmful.
BEFORE SETTING THE OVEN TO SELF-CLEAN
DO NOT USE OVEN CLEANERS – No commercial oven
cleaner or oven liner protective coating of any kind should
be used in or around any part of the oven.
When the oven is set for self clean, the standard
rangetop burners and the electric griddle and grill
may be used. The burners having the ExtraLow
feature cannot be used.
Clean the oven front frame and outer door edges.
Wipe up large spillovers and grease.
Be sure the light bulbs and glass covers are in place.
Turn on the ventilation hood above the range and
leave it on until the oven has completed the self-clean
cycle.
Setting self-clean on 30'' dual fuel Harmony series
models
1. Remove all utensils, racks, and rack guides. Ensure the
oven door is shut.
2. Turn the mode knob to SELF CLEAN.
3. Turn the temperature knob to CLEAN.
Self-clean duration is 2 hours.
28
Setting self-clean on dual fuel models with a display
1. Remove all utensils, racks, and rack guides. Ensure the
oven door is shut.
2. Turn the mode knob to SELF CLEAN and the
temperature knob to CLEAN.
3. Press the right ) to set the desired clean level and
press ENTER.
Soil level
Low
High
4. After the information text, press ENTER.
NOTE: The door closing process takes
approximately 20 seconds to complete, at which
time the door becomes locked. Check to make
certain the door is locked. Do not use self-clean if
the oven doesn't lock.
At the end of the clean cycle
9 CAUTION
The interior of the oven will still be at baking temperatures
when the automatic lock cycles to its open position and
the oven door can be opened.
The door latch will open automatically when the oven is
below 500°F (260°C).
1. Turn the mode knob to OFF.
2. Turn the temperature knob to OFF.
To set end time of self-clean
1. Remove all utensils, racks, and rack guides. Ensure the
oven door is shut.
2. Turn the mode knob to SELF CLEAN.
®
3. Press the right ( or ) to set the desired clean level and
press ENTER.
4. Press TIMERS, press the left ( or ), and select END
TIMER.
5. Press the right ( or ) to set the END TIMER, and press
ENTER.
6. After the information text, press ENTER.
NOTES:
After self-clean completes its cycle, the self-clean
function will be prevented from running again for a
period of 24 hours.
Duration (excluding cool off)
1 ½ hours
3 hours

Publicité

Chapitres

Table des Matières
loading

Table des Matières