Intended Use - Winkhaus panicLock AP4 Série Instructions D'installation

Installation, Operating and
Maintenance Instructions
EN
1
Panic locking systems according to EN 1125:
2008
Panic door locks in accordance with EN 1125:
2008 (= lock + keep + panic bar) are to be ap-
plied in accordance with the standard wherever
a high level of public access is expected and
where panic situations could arise due to pub-
lic unfamiliarity with the layout. This applies to
all public areas where the general public gather,
theatres, cinemas, discos, schools and hospitals.

1.3 Intended Use

The emergency exit / panic locking systems and the Winkhaus components re-
commended are suited for the following areas of application:
• relative air humidity of max. 95%
• ambient temperature of between -20 ... +60°C.
The complete fitting is designed to be used in conjunction only with the genuine
Winkhaus parts. Other parts which are not recommended by Winkhaus can ad-
versely affect the default properties of this locking system.
It is assumed that the lock will be used as intended.
The proper functions of the access control systems and of the accessory equip-
ment included in the scope of delivery of the Winkhaus company have been
tested. If you use components made by other companies and if you have any
doubts about the suitability of these components, you will have to contact the
respective manufacturer about their suitability for use.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4 + AV3 OR
Note: The decision as to which standard is applied in
individual cases falls to the architect / planner, if applicable in
consultation with the responsible building authority.
6 5051068