Winkhaus panicLock AP4 Série Instructions D'installation page 93

Masquer les pouces Voir aussi pour panicLock AP4 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation, Operating and
Maintenance Instructions
Declaration of performance No. 011.1 CPR
1. Unique identification code of the product type:
2. Type, batch or serial number of a different identifier for identification of the construction product accor ding to Article 11,
paragraph 4 of the Construction Products Regulation (CPR):
3. Purpose of use intended by the manufacturer or intended purpose of use of the construction product in accordance with
the applicable harmonised technical specification:
4. Name, registered trade name or trademark and contact information of the manufacturer in ac cordance with Article 11,
paragraph 5 of the Construction Products Regulation (CPR):
5. Name and contact information of the authorised person, if applicable, who is commissioned with the tasks in accordance
with Article 12, paragraph 2 (CPR):
6. Systems or systems for the evaluation and inspection of the performance reliability of the construction product in
accordance with Annex V of the Construction Products Regulation (CPR):
7. The MPA NRW with the identification number 0432-MPA-NRW of the notified body has carried out the type inspection in
accordance with the specifications of EN 1125: 2008-04 and evaluated and verified the performance reliability according to
System 1, as well as issued the test report.
8. Declared performance:
Significant features
Capability for passage
Permanent functionality of the release capability
Capability of independent closing (of fire/smoke
protection doors in escape routes)
Permanent functionality in regard to the ca pability of
automatically closing C as well as in regard to ageing and
diminished quality
Fire resistance capability E (Room closure) and heat
insulation I
Control of harmful substances
9. The product described under sections 1 and 2 fulfils the performances listed under section 8.
This declaration of perfor mance is ussed under the sole resposability of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Meiningen, 17/02/2017
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen ∙ T +49  369  3950 - 0 ∙ tuerverriegelung@winkhaus.de ∙ www.winkhaus.de
STV SB February 2017 · EN · All rights reserved.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49  369  3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4 + AV3 OR
panicLock AP4, Panic locking systems to DIN EN 1125
STV-AP4 E1/B1/D1
STV-AP4 E2/B2/D2
For doors in escape routes with fittings according to DIN EN 1125
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen
N/A
System 1
Certificate 0432 – CPR – 00107-02
No harmful substances may be con tained
within or released by this pro duct.
ppa. Dr. D. Warnow, Technical Director
Performance
Harmonised techni cal specification
fulfilled
Class 7
fulfilled
Class 7
Class B
ppa. A. Dinkelborg, Director of Product Management
43
5051068
DIN EN 1125: 2008-04
(EN 1125: 2008 (D))
EN
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Paniclock stv-ap4 série

Table des Matières