Winkhaus panicLock AP4 Série Instructions D'installation page 89

Installation, Operating and
Maintenance Instructions
5.3.1 Fittings / Door handle set
No. Manufacturer
1 FSB
2 HOPPE
3 GLUTZ
4 ECO
5 HEWI
6 HERMAT
7 Diekmann
5.4 Panic locking system STV-BM-EN1125
Article VS- Func-
no. type tion
STV-AP B
a)
STV-BM B
a) b) c)
Maximum door sash height: 2500 mm
Maximum door sash width: 1500 mm
All locks alternatively with 1.5 mm rreduced latch. If the cylinder (PZ, RZ)
standard or half-cylinder is the escape door function of the lock is only
guaranteed when the key is removed. The closure may be equipped with a
maximum of two additional bolt locks.
a) All locking cylinders with proof of suitability according to the FZG Test
Guideline Gütegemeinschaft locks and fittings e. V. as well as "profile
cylinder in accordance with EN 1303 (corrosion resistance class 3)
generally with cam position ± 30°" may be used without further proof.
Mechatronic cylinder only as specified by the manufacturer.
b) The closure may be equipped with a maximum of two additional bolt
locks.
c) An emergency power back up must ensure that the bolt always reaches
the end position in the event of a power failure.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4 + AV3 OR
Codification
ift-Registrier-Nummer: 2308000244-1-3
Backset Centre
distance
I 35 - 80 mm 92 mm PZ
94 mm RZ
I 35 - 80 mm 92 mm PZ
94 mm RZ
39
DO 20.3.01, DO 20.3.02
DO 20.x.01, DO 20.x.02
DO 20.1.01, DO 20.1.02
DO 20.13.01, DO 20.13.02
Faceplate Classification
16 – 24 mm 3 7 6 B 1 3 2 1 A B 1 - 3
16 – 24 mm 3 7 6 B 1 3 2 1 A B 1 - 3
5051068
EN
–
5
DO 20.16
Kmb