Figure 6-12 Personal Settings Page
6.2.6.2 Coeffi cient Settings
Default parameters are displayed for the users location.
Figure 6-13 Coeffi cient Settings Page
6.2.6.3 Install Settings
Correct passwords are requested when entering Install Settings. Install settings for the installer
and service technicians are different. After confi rmation of the installer password (5555) user can
set inverter ID and insulation.
CAUTION
40
CAUTION! Machine and equipment damage may
occur.
Insulation settings should only be set by a system installer or
engineer. The inverter can be damaged if these settings are not
set correctly. Insulation setting must be according to the PV
array connection condition.