4.2 Mounting
This unit utilizes a wall mounting system. Please ensure the installation is perpendicular and
with the AC plug at the bottom. Do not install the device on a slanted wall. The dimensions of the
mounting bracket are shown in the following figures. There are 12 pcs. of M6 screws required for
attaching the mounting plate to the wall. Attach the mounting plate securely to the wall, before
attaching the inverter on the mounting plate.
Note: Please ensure you are
using the correct fastener for the
material you are attaching the
inverter mounting plate to.
Figure 4-2 Attaching the mounting bracket to the wall
16