Replace A Fan; Figure 7-1 Removing The Fan Bracket From The Inverter; Figure 7-2 Removing The Fan From The Fan Bracket - Delta SOLIVIA 15 EU G3 TL Manuel D'utilisation Et D'installation

Figure 7-1 Removing the fan bracket from the inverter

7.2 Replace a Fan

If one of the fans has failed and needs to be replaced, user should remove the 4 screws (circled
below) that attach the fan to the fan bracket. Next, pull the fan slightly away from the bracket and
disconnect the fan connector located behind the fan bracket. The fan can now be removed and
replaced with a new fan. Follow the procedure in reverse to install the new fan. (Figure 7-2 illus-
trates the replacement of the first fan on the fan bracket. Call the support hotline for assistance in
procuring a replacement fan.
Figure 7-2 Removing the fan from
the fan bracket
44