Unpacking; Identify The Inverter; Figure 2-1 Unpacking Process; Figure 2-2 The Type Label - Delta SOLIVIA 15 EU G3 TL Manuel D'utilisation Et D'installation

2.3 Unpacking

1. Unscrew the 6 screws (see Figure 2-1a for the locations).
2. Lift the cover off and remove the plastic covering (see Figure 2-1b).
3. Lift Inverter out of the package (see Figure 2-1c).
4.
5.
51cm 6.
1.
2.
3.
a. b. c.

Figure 2-1 Unpacking Process

2.4 Identify the Inverter

User can identify the model number by the information on the product label. The model number,
specifi cation as well as the series no. is specifi ed on the product label. In regard to the label loca-
tion, please refer to the below fi gure.
or

Figure 2-2 The Type Label

10