6.2.5 Inverter Information
This page includes the following information: serial number, fi rmware version, installation date,
and inverter ID. To change the inverter ID, please refer to 7.3.7.3 Install Settings.
Figure 6-10 Inverter Information Page
6.2.6 Settings
Settings includes Personal Settings, Coeffi cients Settings, Install Settings, and Italy Selftest. Italy
Selftest selection will only exist when Italy is selected in Country Settings.
Figure 6-11 Settings Page
6.2.6.1 Personal Settings
User can set the Language, Date, Time, Screen Saver, LCD Brightness, and Contrast on the Per-
sonal Setting Page. Screen Saver can be adjusted from 5 minutes to 60 minutes. When over the
setting time limitation, without the pressing of any buttons, the LCD backlight will go off automati-
cally. Brightness and contrast can be adjusted from 1-5 levels (low to high).
Note: The information shown in fi gure 6-10 is for
illustration purposes and may not match the actual
information displayed on your inverter.
39