CONTENTS GUIDE
Parts identification ........................................... 2
Maintenance ..................................................... 5
Transport and storage ..................................... 6
Cleaning ............................................................ 7
INTRODUCTION
Dri-Eaz dehumidifiers reduce humidity in enclosed
PARTS IDENTIFICATION
FIG. A: FRONT
Control panel.
FIG. C: POWER AND PUMP
ATTACHMENT POINTS
07-01674J F410, F411
Integrated handle.
Molded pocket
for cord storage.
Humid air inlet
(both sides).
Process (dehumidified)
air outlet. May be used
with standard 12" rigid
or layflat ducting.
Lower back panel. Remove
this panel to access the
pump for servicing.
Bottom of back
Power cord socket.
polyethylene housing.
Remove two bolts to
remove pump for cleaning.
2
structural environments by removing water vapor from
the air. With proper use, your dehumidifier can help dry
carpet, carpet pad, floors, walls, building contents and
more. Using Dri-Eaz dehumidifiers can also help prevent
secondary damage caused by high humidity. For best
results, use your dehumidifiers with Dri-Eaz TurboDryer
airmovers placed around the perimeter of the room to
distribute heat energy and release moisture from wet
surfaces into the air.
How LGR dehumidifiers work
Dri-Eaz low-grain refrigerant dehumidifiers operate by
pulling moist air in across a very cold evaporator core.
The moisture in the air condenses on the coil. In certain
FIG. B: REAR
FIG. D: PUMP ACCESS PANEL
Lower back panel. Remove the
five retaining screws to remove
pump for cleaning.
Rugged rotomolded
housing resists dents
and scratches and is
easy to maintain.
Drain hose pocket.
Dri-Eaz Products, Inc.