Usage - Beurer BM 28 Mode D'emploi

There are two different ways to access the menu from
which you can adjust the settings:
• Before initial use and after each time you replace the
battery:
When inserting batteries into the device, you will be
taken to the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off, press and hold the
SET button for approx. 5 seconds.
To set the date and time, proceed as follows:
• Select 12h or 24h mode using the function buttons -/+.
Press SET to confirm. The year display will start to flash.
Set the year with the function buttons -/+ and confirm
with SET.
• Set the month, day, hour and minute and confirm each
with the SET button.
• The blood pressure monitor switches itself off automati-
cally.
Setting the alarm
You can set 2 different alarm times to remind yourself to
take the measurement. To set the alarm, proceed as follows:
• Press and hold the function buttons - and + simultane-
ously for 5 seconds.
• Alarm 1 is shown in the display; "on" or "off" flashes
at the same time. With the function buttons -/+, choose
whether alarm 1
deactivated ("off" flashes) and confirm with the SET but-
ton.
• If alarm 1 is deactivated ("off") you automatically
switch to setting alarm 2
• If alarm 1 is activated, the hours flash on the display.
Select the desired hour using the function buttons -/+ and
confirm with SET. The minutes flash on the display. Select
the desired minute using the function buttons -/+ and
confirm with SET.
• Alarm 2 is shown in the display, "on" or "off" flashes
at the same time. To set, proceed as for alarm 1
blood pressure monitor switches itself off automatically.

7. Usage

General rules when measuring blood pressure yourself
• In order to generate as informative a profile of the pro-
gression of your blood pressure as possible and ensure
that the measured values can be compared, you should
measure your blood pressure regularly and always at the
same times of day. It is recommended that you measure
your blood pressure twice a day: once in the morning
after getting up and once in the evening.
• You should always carry out the measurement when you
are sufficiently physically rested. You should therefore
avoid taking measurements during stressful periods.
30
should be activated ("on" flashes) or
.
. The