Cook Timer; Kitchen Timer - Bosch NIT5469UC Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour NIT5469UC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving)
other e.g. doughnuts (0.5 lb per serving)
Keep warm
tomato sauce
* ongoing cooking without lid
** without lid

Cook Timer

The element automatically switches off after the set time
has elapsed.
CAUTION
9
Never leave the cooktop unattended when in use.
Boilovers cause smoking and greasy spillovers may
ignite.
Setting procedure:
Select the cooking zone and the required power level.
1.
Touch the Timer key. The
2.
cooking zone display and
display.
Within the next 10 seconds, set the required cooking
3.
time using the number keys.
After a few seconds the timer will start to count down.
The cooking time begins to elapse.
Note: The same cooking time can be set automatically
for all cooking zones. The set time for each of the
cooking zones counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or cancelling cook time
Select the desired element and touch the Timer key.
1.
Adjust the cook time using the number keys. To
2.
cancel cook time set the timer to
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
indicator in the element display
x
stays on.
Touch the Timer key, to turn the indicators and the beep
off.
indicator lights up in the
x
is shown in the timer
‹‹
.
‹‹
appears in
‹‹
Notes
To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
cooking time.
You can set a cooking time of up to
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the section on ~ "Basic settings"
Note: The cook time can be changed or cancelled for
any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to

Kitchen timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
Touch the Timer key until the
1.
and min appear on the timer display.
‹‹
Set the desired time using the number keys.
2.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the Timer key repeatedly until the
lights up.
Change the time using number keys, or set
to delete the programmed time.
When the time has elapsed
A beep sounds.
for
indicator lights up. The displays go out after
V
10 seconds.
When the Timer key is touched, the displays go out and
the beep stops.
Power levels
8 - 9
4. - 5.
1.
ŠŠ
indicator lights up.
V
appears on the timer display and the
‹‹
minutes.
.
‹‹
V
indicator
in order
‹‹
13

Publicité

Table des Matières
loading

Table des Matières