Basic Settings - Bosch NIT5469UC Manuel D'utilisation Et D'entretien

Basic settings

The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Indicator/sym- Function
bol
Panel lock
Manual*.
‹
Automatic.
‚
Function deactivated.
™‚ ƒ
Signal tones
Confirmation and error signals are switched off.
‹
‚ Only the error signal is switched on.
Only the confirmation signal is switched on.
ƒ
All signal tones are switched on.*
™ƒ „
Automatically setting the cooking time
Switched off.*
‹‹
-
™† ‹‚ ŠŠ
Audible signal duration for the timer function
‚ 10 seconds.*
30 seconds.
ƒ
1 minute.
™‡ „
Power management function. Limiting the total power of the cooktop
The available settings depend on the maximum power of the cooktop.
Deactivated. Maximum power of the cooktop. */**
‹
1000 W minimum power.
‚
.1500 W
‚
...
3000 W recommended for 13 A.
„
.3500 W recommended for 16 A.
„
4000 W
...
.4500 W recommended for 20 A.
...
...
or
™ˆ Š
Time for selecting the cooking zone
Unlimited*: The cooking zone that was set last remains selected.*
‹
Limited: The cooking zone only remains selected for a few seconds.
™Š ‚
Check the cookware and the cooking results
Not suitable
‹
‚ Not perfect
Suitable
™‚ƒ ƒ
Restore to standard settings
Individual settings.*
‹
Restore factory settings.
™‹ ‚
*Factory setting
**The cooktop's maximum power output is shown on the rating label.
--------
Time until automatic switch-off.
.Maximum power of the cooktop.**
Š
15