Getting Familiar With The Appliance; Control Panel; Cooking Zones; Residual Heat Indicator - Bosch NIT5469UC Manuel D'utilisation Et D'entretien

Getting familiar with the appliance

In this section we describe the control panel, elements
and displays.
Page 2 contains a list of models and dimensions.

Control Panel

Display icons
Cooktop ready
‹
Power level
-
‚ Š
Residual heat
/
• œ
Indicated function active
Ú
Panel lock
D
Indicates selected cooking zone
A
SpeedBoost
›
Cook timer
x
Timer value
‹‹
Timer indicator
min
V

Cooking zones

Cooking Zone
Single cooking zone
$
Use only cookware suitable for induction cooking; see the section ~ "Cooking with Induction"

Residual heat indicator

The cooktop has a residual heat indicator for each
cooking zone. This indicates that a cooking zone is still
hot. Do not touch a cooking zone while the residual heat
indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
▯
Display : Low temperature
œ
▯
If you remove the cookware from the cooking zone
during cooking, the residual heat indicator and the
selected heat setting will flash alternately.
10
function
®
Use cookware of suitable size.
Note: Depending on the appliance model, individual
details and colors may differ.
Touch keys
Main switch
On/Off
Select cooking zone
$
Settings area
0 1 & 2 & ... 8 &
9
Panel lock
Panel Lock
Wipe protection
Clean Lock
SpeedBoost
Speed Boost
Timer functions
Timer
Touch control zone
When you touch a symbol, the corresponding function
will be activated.
NOTICE: Always keep the touch control zones clean
and dry. Moisture and dirt can affect proper functioning.
When the cooking zone is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the cooking zone is still warm.
function
®