Cook Time - Bosch NIT8665UC Manuel D'utilisation Et D'entretien

Turning on SpeedBoost
Select an element.
1.
Touch Boost. The letter
2.
display. The function has been turned on.
Turning off SpeedBoost
Select an element.
1.
Touch the Boost touch key. The letter
2.
be displayed and the element will return to heat level
. The SpeedBoost function has been deactivated.
Š
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting the cook time
Select the desired element and power level.
1.
Touch the Timer key. The
2.
light up on the timer display. The indicator for the
desired element lights up.
16
will light up in the element
›
› will no longer
, min and __ indicators
‹‹
Within the next 10 seconds, set the required time
3.
using the number keys 1 to 9.
After a few seconds, the timer will start to count down.
The last programmed cook time will appear in the
display.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
in the element display and the timer display shows
Once you touch the Timer key, the indicators and the
beep are turned off.
Changing cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
Cancelling cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and
r
0 from the number keys until
Timer function with AutoChef™
When you cook using AutoChef™, the programmed cook
time begins to count down once the selected element
reaches the set temperature.
Notes
You can set a cook time of up to 99 minutes.
▯
To program a cook time of less than 10 minutes,
▯
always select 0 first before you select the required
value.
After a power outage, the timer function will be
▯
cancelled.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the
of the required element lights up. Adjust the cook time
with touch keys 1 to 9 or deactivate with 0.
. appears
‹ ‹
indicators light up. Then select
‹‹ is displayed.
$ indicator
.
‹‹