Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off an element.
Setting the kitchen timer
Touch the Timer key.
1.
The __, min and
indicators light up.
V
Set the required time using the number keys 0 to 9.
2.
After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
Once the time has elapsed
A beep sounds.
and
‹‹
Timer key. The indicators go out and the beep stops.
Changing the time
Touch the Timer key. The __ and
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and
Touch the 0 key until
‹‹
The
indicator goes out.
V
Notes
If the set time is not displayed, touch the Timer key
▯
several times until the
timer display.
The timer will be deactivated after a power outage.
▯
The automatic off function for an element and the timer
▯
function can both be operated simultaneously.
‹‹
appears in the timer display.
indicators light up. Touch the
U
indicators light up.
V
indicators light up.
V
appears on the timer display.
indicator lights up on the
U
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock until a beep sounds and
the
indicator lights up. The cooktop is now locked.
D
After some time, the
D
Turning the child lock off
Touch Clean Lock/Child Lock until a beep sounds and
the
indicator turns off. The child lock is now
D
deactivated. The cooktop can be switched on.
CAUTION
9
The child lock may be accidentally turned on and off
due to:
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the Clean Lock/Child
▯
Lock touch key.
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The
appears. The control panel is locked for approximately
35 seconds. You can now clean the surface of the
control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
You can turn off the cooktop at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
indicator will go out.
indicator
>
and the residual heat
"‰
17
Publicité
Table des Matières
Dépannage
