Cook Time; Kitchen Timer - Bosch NET8068SUC Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour NET8068SUC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving)
other e.g. doughnuts (0.5 lb per serving)
* ongoing cooking without lid
** without lid
*** turn several times

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
The cooktop must be turned on.
Select the desired element and heat level.
1.
Touch the Timer key. The indicators
2.
up and timer value
‹‹
Within the next 10 seconds set the desired cook time
3.
using the number keys.
The timer starts to count down.
Changing or cancelling cook time
Select the desired element and touch the Timer key.
1.
Adjust the cook time using the number keys. To
2.
cancel cook time set the timer to
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
indicator in the element display
x
stays on.
12
and min light
x
is indicated in the timer display.
.
‹‹
appears in
‹‹
Touch any key to turn off the indicators and the beep
Notes
If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
cooking time.
You can set a cooking time of up to
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Select the desired element. Touch the Timer key. Adjust
the cook time using the number keys, or deactivate it by
setting the timer value to

Kitchen timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
Touch the Timer key until the
1.
and min appear on the timer display.
‹‹
Set the desired time using the number keys.
2.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the Timer key repeatedly until the
lights up.
Change the time using number keys, or set
to delete the programmed time.
When the time has elapsed
A beep sounds.
indicator lights up. The displays go out after
V
10 seconds.
Touch any key to turn off the indicators and the beep.
for
Power levels
8 - 9
4. - 5.
ŠŠ
.
V
indicator lights up.
appears on the timer display and the
‹‹
minutes.
indicator
V
in order
‹‹

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Net8068ucNet8668sucNet8668uc

Table des Matières