Speedboost Function; Cook Time - Bosch NIT8065UC Manuel D'utilisation Et D'entretien

Frying programs
Use the frying programs with a system pan only.
You can use the frying programs to prepare the following
dishes:
Program Dish
Ground meat
˜‚
Hamburger, Pork chop
˜ƒ
Steak medium rare
˜„
Steak medium or well done
˜...
Fish
˜†
Pancakes, French Toast
˜‡
Frozen oven French fries
˜ˆ
Stir-fried vegetables
˜‰
Omelette, eggs
˜Š
Select the desired program
Select the element:
Press the Programs touch key. The
1.
up on the element display.
Select the desired frying program using the number
2.
keys. The temperature symbol
The frying program is activated.
The temperature symbol
temperature is reached.
Add the frying oil and then the food to the pan. As usual,
turn the food over to avoid burning.
Turning off the frying program
Select the heating element and then touch Programs.

SpeedBoost function

The SpeedBoost function can be used to heat large
amounts of water faster than by using heat level
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture). If this is not the case, the
flash on the selected element display; then it will
automatically set the power level
Turning on SpeedBoost
Select an element.
1.
Touch Boost. The letter
2.
display. The function has been turned on.
indicator lights
˜‹
appears.
¿
stays lit until the frying
¿
and symbols will
› Š
.
Š
will light up in the element
›
Turning off SpeedBoost
Select an element.
1.
Touch the Boost touch key. The letter
2.
be displayed and the element will return to heat level
Š . The SpeedBoost function has been deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting the cook time
Select the desired element and power level.
1.
Touch the Timer symbol.
2.
The , min and
‹‹
display. The indicator for the desired element lights up
.
Š
Within the next 10 seconds, set the required time
3.
using the symbols 1 to 9.
will no longer
›
indicators light up on the timer
b
15