Three-Wire Connection; Oven Installation; For Best Installation; Removing The Oven Door - Thermador MASTERPIECE Serie Instructions D'installation

Three-wire Connection





1 Cable from power supply
2 Black wires
3 U.L.-listed conduit connector
4 Cable from oven
5 Bare or green wire

Oven Installation

NOTICE Before installing the oven, be sure to verify the
cabinet dimensions and electrical connections.

For Best Installation

The oven can be difficult for two people to handle during
installation. It is recommended to have three or more
people available to assist with lifting the unit into place.
Removal of the oven door during installation (to provide
the necessary handholds and to significantly reduce the
unit weight) can be cumbersome unless the detailed
door removal instructions are followed carefully. Please
take time to read and follow the instructions provided for
an improved installation experience.
6 White wires
7 Red wires

8 Junction box
Connect red wire from oven to red electrical supply
▯
wire.

Connect black wire from oven to black electrical
▯
supply wire.
Connect both the bare ground wire and the white wire
▯
from the oven to the white (or gray) neutral electrical

supply wire, or the bare/green ground electrical supply

wire.
The conduit cable, where connected at the oven, swivels.
Rotate conduit cable upward (or downward) and direct
through hole prepared in cabinet to attach to junction
box.
To maintain serviceability, the flex conduit must not be
shortened and should be routed to permit temporary
removal of the oven.

Removing the Oven Door

CAUTION
9
WHEN REMOVING THE OVEN DOOR:
Make sure oven is cool and power to the oven
▯
has been turned off before removing the door.
Failure to do so could result in electrical shock or
burns.
The oven door is heavy and parts of it are fragile.
▯
Use both hands to remove the oven door. The
door front includes glass components. Handle
carefully to avoid breakage.
Grasp only the sides of the oven door. Do not
▯
grasp the handle as it may swing in your hand
and cause damage or injury.
Failure to grasp the oven door firmly and properly
▯
could result in personal injury or product damage.
To avoid injury from hinge bracket snapping
▯
closed, be sure that both locking levers are
securely in place before removing the door. Also,
do not force the oven door open or closed - the
hinge could be damaged and injury could result.
Do not lay the removed door on sharp or pointed
▯
objects as this could break the glass. Lay the
door on a flat, smooth surface, positioned so that
the door cannot fall over.
9