Preparation; Before You Begin; Checklist For Installation - Thermador MASTERPIECE Serie Instructions D'installation

Masquer les pouces Voir aussi pour MASTERPIECE Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preparation

Before you Begin

Tools and Parts Needed
#2 Philips head screwdriver (to install trim screws).
T20 Star-head screwdriver (to remove shipping
screws).

Checklist for Installation

Use this checklist to verify that you have completed each
step of the installation process. This can help you avoid
common mistakes.
Refer to detailed instructions for each step in the
sections following this checklist.
Before installing the oven, be sure to verify the
___ 1.
cabinet dimensions are correct for your unit and
that the required electrical connections are present.
Make sure the electrical conduit provided on the
unit is able to reach to the point of connection.
Section: Dimensions and Cabinet Requirements
Move the oven unit into place in front of the cabinet
___ 2.
opening. Section: Removing Packaging
Remove packaging materials, leaving the bottom
___ 3.
packaging on the unit to avoid damaging flooring.
Section: Removing Packaging
Remove the T20 (star head) screws holding the
___ 4.
unit to the base of the carton. Section: Removing
Packaging
Remove the oven door(s). Section: Oven
___ 5.
Installation, "Removing the Oven Door"
6
1/8" drill bit and drill (to drill pilot holes for trim
screws).
Measuring tape.
Gloves and long sleeves are recommended (to help
protect hands and arms from scratches).
Parts Included
Phillips head screws (6).
Power Requirements
The outlet must be properly grounded in accordance with
all applicable codes.
Team lift the unit directly into the cabinet cutout.
___ 6.
Section: Oven Installation, "Placing the Oven into
the Cabinet Opening"
Slide the unit all the way into place. Section: Oven
___ 7.
Installation, "Placing the Oven into the Cabinet
Opening"
Fasten the oven unit to the cabinetry opening with
___ 8.
the screws supplied. Section: Oven Installation,
"Placing the Oven into the Cabinet Opening"
Reinstall the oven door(s). Section: Oven
___ 9.
Installation, "Placing the Oven into the Cabinet
Opening"
Always read and follow the complete installation
instructions contained in this manual.

Publicité

Table des Matières
loading

Table des Matières