Preparation; Before You Begin; Checklist For Installation - Thermador MASTERPIECE PROFESSIONAL Serie Instructions D'installation

Masquer les pouces Voir aussi pour MASTERPIECE PROFESSIONAL Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preparation

Before you Begin

Tools and Parts Needed
#2 Philips head screwdriver (to install trim screws).
T20 Star-head screwdriver (to remove shipping
screws).

Checklist for Installation

Use this checklist to verify that you have completed each
step of the installation process. This can help you avoid
common mistakes.
Refer to detailed instructions for each step in the
sections following this checklist.
1.
Before installing the oven, be sure to verify the cabinet
dimensions are correct for your unit and that the
required electrical connections are present. Make sure
the electrical conduit provided on the unit is able to
reach to the point of connection.
Section: Dimensions and Cabinet Requirements
2.
Move the oven unit into place in front of the cabinet
opening.
Section: Removing Packaging
3.
Remove packaging materials, leaving the bottom
packaging on the unit to avoid damaging flooring.
Section: Removing Packaging
4.
Remove the T20 (star head) screws holding the unit to
the base of the carton.
Section: Removing Packaging
5.
Remove the oven door(s).
Section: Oven Installation, "Removing the Oven Door"
6
1/8" drill bit and drill (to drill pilot holes for trim
screws).
Measuring tape.
Gloves and long sleeves are recommended (to help
protect hands and arms from scratches).
Parts Included
Phillips head screws (6).
Power Requirements
The outlet must be properly grounded in accordance with
all applicable codes.
6.
Team lift the unit directly into the cabinet cutout.
Section: Oven Installation, "Placing the Oven into the
Cabinet Opening"
7.
Slide the unit all the way into place.
Section: Oven Installation, "Placing the Oven into the
Cabinet Opening"
8.
Fasten the oven unit to the cabinetry opening with the
screws supplied.
Section: Oven Installation, "Placing the Oven into the
Cabinet Opening"
9.
Reinstall the oven door(s).
Section: Oven Installation, "Placing the Oven into the
Cabinet Opening"
Always read and follow the complete installation
instructions contained in this manual.

Publicité

Table des Matières
loading

Table des Matières