Dimensions For 30" Wall-Mounted Units - Thermador MASTERPIECE Serie Instructions D'installation

Masquer les pouces Voir aussi pour MASTERPIECE Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dimensions for 30" Wall-Mounted Units

30" Single Oven
é
 PP
ë
 PP

 PP

 PP
ê

 PP
 PP

 PP
Wall Installation 30" Single Oven:
ê
 PP
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
NOTICES
The conduit box must be installed either above or
below the unit. If the conduit box is installed below the
unit, a 2" diameter hole or space is required between
the back wall and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of
supporting a weight of at least 212 lbs (96 kg).

 PP

 PP

è
 PP
 PP

 PP

 PP
é
 PP

 PP
PLQ ë
PD[ 
   PP
30" Double Oven
é
 PP
ë
 PP
ë
 PP

 PP
ê

 PP
 PP

 PP
Wall Installation 30" Double Oven:
ê
 PP
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back
flush with the bottom and the side of the opening. The
supporting base must be well secured to the floor/
cabinet and level.
NOTICES
The conduit box must be installed either above or
below the unit. If the conduit box is installed below the
unit, a 2 inch diameter hole or space is required
between the back wall and the right rear of the 2x4
supports.
The cabinet base must be flat and capable of
supporting a weight of at least 390 lbs (177 kg).

 PP

 PP

 PP

 PP
ë
 PP

 PP

 PP

 PP
PLQ ë
PD[ é
   PP
17

Publicité

Table des Matières
loading

Table des Matières