Indicator Light And Alarm Sounds - ECOVACS ROBOTICS Deebot N79S Manuel D'instructions

3.5 Indicator Light and Alarm Sounds

Indicator Light
AUTO Mode Button
Flashes BLUE
Flashes RED or glows a continuous RED
Glows a continuous RED
Glows a continuous BLUE
Alarm Sounds
If DEEBOT detects a problem, it emits alarm beeps and the AUTO Mode Button flashes RED or
glows RED.
Flashing RED:
Alarm Sound
The robot is suspended or
One Beep
stuck.
Anti-Collision Bumper
Two Beeps
Malfunction
Three Beeps Anti-Drop Sensors Malfunction
Four Beeps Low Battery
3. Operating and Programming
The robot is charging.
The robot has a problem.
The robot has low battery.
The robot is cleaning.
Problems
Status
Solution
Place the robot on an even surface, or
remove the obstacles, and restart the robot.
Check the Anti-Collision Bumper for debris
and remove the debris.
Clean Anti-Drop Sensors as described in
section 4 Maintenance.
Manually place the robot on the Charging
Dock to charge.
17
EN