Power Off - ECOVACS ROBOTICS Deebot N79S Manuel D'instructions

3. Operating and Programming
6 Pause
■ Pause DEEBOT by pressing the
button on DEEBOT or the START/
PAUSE Button on the Remote Control.
* The AUTO Mode Button on the robot's Control Panel stops glowing when the robot is paused
for more than 10 minutes. Press AUTO Mode Button on the robot or press any button on the
Remote Control to start the DEEBOT immediately.
7

Power OFF

■ Turn the robot's Side Power Switch to
the ON position. "l" indicates ON and "O"
indicates OFF.
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead
of powered OFF.
12
EN