Power Off - ECOVACS ROBOTICS DEEBOT 4 Mode D'emploi

3. Operating and Programming
7 Start
Press the AUTO Mode Button on DEEBOT 4
or on the Remote Control. DEEBOT 4 starts
to work immediately in AUTO Cleaning Mode.
To choose another Cleaning Mode,
*
please refer to section 3.3 Cleaning Mode
Selection for details.
Pause
8
Pause DEEBOT 4 by pressing the AUTO
Mode Button or the Pause Button on the
Remote Control.
DEEBOT 4 can be directed to move
*
forward, backward, left and right using the
Direction Control Buttons on the Remote
Control when it is Paused. DEEBOT 4
does not clean when Paused.

Power OFF

9
Press and hold the AUTO Mode Button on
DEEBOT 4 for 3 seconds. DEEBOT 4 is
powered OFF when the AUTO Mode Button
stops glowing.
When DEEBOT 4 is not working, it is
*
suggested to keep it powered ON and
charging.
10
EN
OFF