Intended Use; About This Book; Vs1 Configurations - Philips SureSigns VS1 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Intended Use

Large, colored LEDs display the current parameters. To increase readability, each parameter has its own
unique color. A large LCD screen displays historical information and is also used to configure the system.
The monitor uses dynamic linear deflation blood pressure technology and features a full array of alarm
settings for each displayed parameter. It can hold up to 400 lines of data that can be viewed or printed in
several formats.
The monitor can operate on AC power or on a 6-volt internal battery.
Intended Use
The VS1 monitor is intended to monitor a single patient's vital signs in a hospital, outpatient surgery,
practitioner facilities, or in an environment where patient care is provided by qualified healthcare personnel
who will determine when use of the device is indicated, based upon their professional assessment of the
patient's medical condition. The patient populations are adult, pediatric, and neonatal.
The device is capable of monitoring pulse rate, non-invasive blood pressure, temperature, and SpO
device is intended for use by qualified healthcare personnel trained in its use.

About this Book

This book explains how to set up and use the VS1 monitor. It contains information on all available features
and parameters and, therefore, may contain information that does not apply to your monitor. It is intended
as a comprehensive guide to the operation of the unit and should be read carefully prior to using the unit.
Additional documentation includes a set of Quick Reference Cards and a Service Manual.

VS1 Configurations

The VS1 monitor is available in several configurations. A fully configured VS1 monitor has NIBP, SpO
and Temperature parameters, plus a printer. The following table lists each model, configuration, and
corresponding Philips part number.
Philips Product
Number
863055
863057
863061
863059
863056
863058
863062
863060
1-2
Overview
Configuration
NIBP only
NIBP with recorder
NIBP, SpO
2
NIBP, SpO
with recorder
2
NIBP, Temp
NIBP, Temp with recorder
NIBP, SpO
Temp
2,
NIBP, SpO
Temp with recorder
2,
. The
2
2,
Model number
PM2200
PM2200P
PM2210
PM2210P
PM2220
PM2220P
PM2240
PM2240P

Publicité

Table des Matières
loading

Table des Matières