Floor-Mounting The Ups Or External Battery Cabinets (Rt Models Only); Mounting The Ups Only; Mounting The Ups Plus One External Battery - Chloride Power Protection ACTIVE Manuel Utilisateur

3.12 Floor Mounting the UPS or External Battery Cabinets (RT Models Only)
The RT UPS and external battery packs are designed to be fl oor standing as an alternative to rack
mounting.
3.12.1 Mounting the UPS
only
Assemble the two sets of feet
included with the UPS and place
the UPS between feet as shown
in the next fi gures.
Chloride Active
NOTE: (only for units with front
panel with LCD display). The
LCD Display can be rotated to
the adequate position when it is
fl oor-mounted as illustrated in the
next fi gure.
ATTENTION: Use all supplied
mounting hardware on each UPS
and external battery
After mechanical installation is
complete, please read section
4 for proper commissioning and
operation of the system.
3.12.2 Mounting the UPS
plus One External Battery
Assemble the two sets of feet
with the spacer provided and
place the UPS and battery pack
between feet as shown in the
next fi gure. Then secure UPS
and battery pack with plates and
screws provided.
UK
15