Basic Safety Information; Intended Use - NovoPress AFP 101 Manuel D'utilisation

AFP 101
EN EN
Contents
1. Preface ........................................................................................................................................... 10
2.

Basic safety information ................................................................................................................. 10

3.

Intended use................................................................................................................................... 10

4. Technical data ................................................................................................................................ 11
5. Brief description of the press tool ................................................................................................... 12
6. Start-up and operation.................................................................................................................... 13
7. Cleaning, maintenance and repair ................................................................................................. 15
8. Disposal .......................................................................................................................................... 15
9. Warranty ......................................................................................................................................... 16
1. Preface
Dear customer,
Thank you for the trust you have placed in us with the purchase of your new Novopress press tool. All
equipment and tools for the press-fitting of pipe systems are developed and continuously optimised by
Novopress in close co-operation with the system suppliers. Each Novopress tool is carefully tested
and subjected to stringent quality control. The quality of the Novopress tools is also evidenced by the
unique warranty period. Nevertheless, the service life of a tool depends, to a large extent, on you the
customer. Please observe the information contained in this Operating Manual and the system
supplier's processing instructions. The more caution you exercise in using your Novopress tools, the
longer you will be able to use them reliably.
2. Basic safety information
The following pictograms will be used to highlight sections of text. Please observe these instructions
and act with special caution in these cases. All working safety instructions are also to be passed on to
other users/ specialist technicians.
Warning!
For your own safety and the protection of your press tool, please observe the text passages marked with this
symbol.
Note!
This information is directly linked to the description of a function or an operating sequence.
Please read this Operating Manual carefully.
The attached safety instructions must be observed.
3. Intended use
The AFP 101 press tool is exclusively intended for the use of press jaws manufactured by Novopress
or approved by Novopress in agreement with the system supplier. For further details, please contact
the system supplier.
The tool and the press jaws serve exclusively for the purpose of press-fitting pipes and fittings for
which the relevant press jaws are intended.
Any other or additional use is regarded as non-intended.
Novopress is not liable for any resulting consequences or damage. Neither is it liable for press jaws of
other manufacturers nor for any damage caused by such.
Intended use also includes observance of the Operating Manual, adherence to the inspection and
maintenance conditions as well as compliance with all the relevant safety regulations.
EN English
10