Settings For The Base Station; Dialling Mode - Medion LIFE E63063 Mode D'emploi

 Enter the desired alarm time in the HH:MM format with the number keys
and confirm your selection with OK.
The SNOOZE message is displayed.
 Confirm with OK.
 Select the option ON to activate the snooze time and confirm your
selection with OK.
After switching off the alarm, it switches back on again after 7 minutes.
 If you do not want a snooze time set this option to OFF.
When the alarm is switched on, the

16.3. Settings for the base station

 Open the BS SETTINGS. menu and confirm with OK.
 Use the  keys to select the following functions in order to change
them:
16.3.1. Ring tone
You can set the ring tone for the base station here.
 Confirm RINGTONE with OK.
Select a ring tone.
16.3.2. Ring tone volume
You can set the volume for the ring tone on the base station.
 Confirm RING VOLUME with OK.
Set the desired volume.
16.3.3. Deregistering the handset
You can deregister all of the handsets except the last one being used. The
handset that is used to deregister the other handsets cannot be deregistered.
 Confirm DELETE HS with OK.
 Enter the system PIN and confirm with OK.

16.3.4. Dialling mode

Here you can adapt your telephone to the dialling mode of your network
provider. You can choose between tone dialling and pulse dialling. The
factory setting is "Tone". This is the most commonly used dialling mode
nowadays.
Pulse dialling may be necessary for some older telephone systems.
Ask your network provider which dialling mode is required for your
connection.
 Confirm DIAL MODE. with OK.
 TONE: Select this setting for tone dialling.
Other settings in the telephone menu
symbol appears on the display.
DE
FR
NL
EN
181 of 190