Hanging Up; Answering The Telephone; Caller Identity Function - Medion LIFE E63063 Mode D'emploi

Basic functions
The prerequisites for a call being entered are:
− the answering machine does not answer the call.
− the caller's telephone has the CLIP function (the caller's number is
shown on the display).
 In order to open the call list, press the  key.
 Use the  keys to scroll through the entries in the call list and press the
talk key to call the desired entry.
12.4.4. Dialling from the phone book
For adding entries to the phone book (see also "14. Phone book" on page
169).
 Press the
key.
 The phone book opens and the first number is displayed.
 Use the  keys to scroll to the desired telephone number.
 Now press the

12.5. Hanging up

 Press the call key
The call time appears on the display for a few seconds.
NOTE!
If you make a call with nearly discharged batteries, you will hear a
double warning tone every minute during the call.
End the call, place the handset back on the base station and allow
the batteries to charge.

12.6. Answering the telephone

The assigned ring tone will sound in the event of an incoming call and the
call LED will start to flash.
 Pick up the handset to accept the call.
In the menu HS SETTINGS / AUTO-ANSWER on the handset, it
is necessary for the function AUTO-ANSWER to be activated.
 If the handset is not located in the base station or the function AUTO-
ANSWER has been deactivated, press the talk key

12.7. Caller identity function

You can see the telephone number of a caller on the display (if you have
requested the CLIP function from your network provider and if the caller also
has a telephone connection with CLIP function and has not suppressed his
telephone number).
If the caller is saved in the phone book, you will see the name of the caller.
166 of 190
talk key to call the selected entry.
(red) to end the call.
(green).