Programming - Bartscher XCH-050 Mode D'emploi

to 80°C for 20 minutes (key
5. Now press the button Phase
menu.
6. Press the button Regeneration
to 95°C and the core temperature at 65°C (key
7. Press the button Hold
at 70°C.
8. Press Enter
4.3.2 How to edit a saved program
To edit a previously saved program, press the key Book (4) to access
the program list. Select the number of the desired program using keys
(5) and (6).
The regenerator is automatically set to the first phase; if you want to change
the second phase, press the button Phase (3).
Change the regeneration temperature by pressing the button Regenera-
tion (9) and modify the temperature using buttons 5 and 6 to increase it or
decrease it.
Change the regeneration temperature by pressing the button Regenera-
tion (10) and modify the temperature using buttons 5 and 6 to increase or
decrease the value.
Now press Enter (1) to save the changes.
4.3.3 How to delete a saved program
To delete a previously saved program, press the key Book (4) to access the
program list. Select the number of the desired program using keys (5) and
(6).
Press simultaneously for 10 seconds the keys Book (5) and Phase (3), the
program will be deleted.
).
to set the final maintenance temperature
to save the changes.
to switch to phase 2 programming
and set the chamber temperature
).
ENG
15