Mounting; Electrical Connection - Resol KM1 Manuel

3.1 Mounting

Note
Strong electromagnetic fields can impair the function of the device.
Î Make sure the device as well as the system are not exposed to strong
electromagnetic fields.
The unit must only be located in dry interior rooms.
In order to prevent disturbances caused by electromagnetic fields, pay attention to
separate routing of mains cables and bus cables.
112mm
1
3
4 5
2
3.2
6
4 5
7

3.2 Electrical connection

Carry out the connection of the device
ules in the order described below:
Î Connect the data cable (RESOL VBus
essary, extend the cable using the terminal block included and a common two-
wire cable.

Î Connect the mains adapter
Î For a direct connection to a router, connect the device to a router
network cable (included with the KM1,
VBus



6

to the controller / other mod-

, ) to the RESOL controller
®
to the mains socket.

).
www




. If nec-

using the
21