Disassembly; 1-1. Rear Board Removal; 1-2. Chassis Assembly Removal; 1-3. Service Position - Sony KP-57WV600 Manuel D'utilisation

1-1. REAR BOARD REMOVAL

1-3. SERVICE POSITION

SECTION 1: DISASSEMBLY
2 Rear board
1 Fifteen Screws
Dome Washer
(Hex Tap 4 x 20)
1
2
Chassis assembly

1-2. CHASSIS ASSEMBLY REMOVAL

2
Free wiring from purse locks.
NOTE: Observe wire dress
and return to original condition.
Covers
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
3 When plugging in connector from
HM Board to B Board at CN3603
insure two brown wires are facing
upward towards the HV block
assembly.
Screws
(+BVTP3x12)
— 10 —
KP-57WV600/57WV700/
1 Four screws
Dome Washer
(Hex Tap 4 x 20)
Chassis assy
65WV600/65WV700