Best CP45I Serie Guide D'installation page 11

16. REINSTALL THE INTERNAL BLOWER(S) (CP45I AND CP47I SERIES ONLY)
S B M
INGLE LOWER ODELS
Slide the blower to engage its flange in the
retaining bracket.
Using a 5/16" socket, a Robertson or a Phillips
no. 2 screwdriver, secure the blower to the inner
top of the power pack with all blower mounting
screws (previously removed in step 14).
D B M
UAL LOWER ODELS
For each blower, slide it to engage its flanges in both retaining brackets.
NOTE: Both blowers are identical and can be mounted on either side of the power pack.
For each blower, using a 5/16" socket, a Robertson or a Phillips no. 2 screwdriver, secure the blower
to the inner top of the power pack through the front and rear brackets with all blower mounting
screws (previously removed in step 14).
A M
LL ODELS
Plug the blower(s) in.
HD0293
L
EFT SIDE MOUNTING
SCREW LOCATIONS
HD0269
HE0085
11
R
IGHT SIDE
MOUNTING SCREW
LOCATION
HD0282
HD0298
B
LOWERS FRONT BRACKET
B
LOWERS REAR BRACKET
HD0297