Routine Maintenance; Replacement Parts; Recommended Accessories; Service - Inogen HOME Mode D'emploi

Les langues disponibles

Clean the particle filter with a mild liquid detergent (such

as Dawn

) and water; rinse in water and dry before reuse.

Ensure the filter is completely dry before reinstalling into the

concentrator.

Air Inlet Filter

Replace when filter is dirty according to visual indicator.

The air inlet filter may be replaced by the equipment provider

or by the user.

Output Filter

The output filter is intended to protect the user from

inhalation of small particles in the product gas flow. The

device includes an output filter conveniently located behind

the removable cannula nozzle fitting. Inogen requires that this

filter be replaced between patients.

The output filter may be replaced by the equipment provider or by the user.

Routine Maintenance

No special maintenance, other than weekly particle filter cleaning, needs to be

carried out by the user.

Contact your home care provider if you have any questions about equipment.

Use only the following replacement parts:

• Inogen At Home Particle Filter (RP-400)

• Inogen At Home Output Filter Replacement Kit (RP-107)

• Inogen At Home Air Inlet Filter (RP-401)

• Inogen At Home Column Pair (RP-402)

• AC Power Cord (RP-109)

• Humidifier Connector Tube (Salter Labs #S0-676)

• Humidifier Bottle (Salter Labs #7600)

• Nasal Cannula (Salter Labs #16SOFT)

The concentrator is specifically designed to minimize routine preventative

maintenance.

Particle Filter

Air Inlet

Filter

Table des Matières