Storage; Disposal Of Equipment And Accessories; Standards Compliance - Inogen HOME Mode D'emploi

Storage

When not in use, store indoors away from excessive moisture and
temperatures. Storage conditions outside of range specified may result in
damage and device malfunction.

Disposal of Equipment and Accessories

Follow your local governing ordinances for disposal and recycling of the
concentrator and accessories.
9. Specifications, Inogen At Home, Model GS-100
Dimensions:
Weight:
Warm-Up Time:
Oxygen Concentration:
AC Power:
Environmental Ranges
for Use:
Environmental Ranges for
Shipping & Storage:
Maximum Outlet Pressure:
Flow Control Settings:

Standards Compliance

This device is designed to conform to the following standards:
• EN ISO 8359:2012, Oxygen Concentrators for Medical Use – Safety
Requirements (ISO 8359:1996, Second edition, Amendment 1)
• ASTM F 1464:2005, Oxygen Concentrators for Domiciliary Use
• IEC 60601-1:Edition 3.1: 2012, Medical Electrical Equipment
-- Part 1: General requirements for basic safety and essential performance
Classification:
• IEC Class II Equipment
• Type BF Applied Part
• IP21 Enclosure Ingress Protection against solid objects of 12.5mm minimum
diameter and vertically falling drops of water
• Not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide
• Continuous Operation
13
16.5"H x 13"W x 7"D
18 lbs
Less than 5 minutes
90 +6%/-3% at all settings
100-240VAC, 275 W Max, 50-60Hz
Temperature: 41 to 104°F (5 to 40˚C)
Humidity: 15 to 95%, non-condensing
Altitude: 0 to 10,000 ft (0 to 3048 m)
Temperature: -13 to 158°F (-25 to 70˚C)
Humidity: 0 to 93% non-condensing
Altitude: n/a
19.6-40.6 psia
(135-280 KPa Absolute)@ 20˚C
5 Settings: 1 to 5 liters per minute