Display And Delete Measured Values - Beurer BM 54 Mode D'emploi

Blood pressure Systole
value category (in mmHg)
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measurements.
• Select the desired user memory (
M2 memory buttons if the device is switched off.
• To view the measurement data for user memory , press
the M1 memory button.
• To view the measurement data for user
memory , press the M2 memory button.
• The average of all measurements appears
on the display.
Diastole
Action
(in mmHg)
regular monitoring
by doctor
self-monitoring
< 80 self-monitoring
) with the M1 or
• If Bluetooth
®
display), the blood pressure monitor attempts to connect
to the app. If you press the M1 button in the meantime, the
transfer is cancelled and the average values are displayed.
If you press the M2 button, the transfer is cancelled and
the measurement data of user memory
The symbol is no longer shown. The buttons are de-
activated as soon as a connection is established and the
data is transferred.
Press the M1 button if you have selected user memory 1.
Press the M2 memory button if you have selected user
memory 2.
A flashes on the display.
The average value of all saved measured val-
ues in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morning:
5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (evening:
6.00 p.m. – 8.00 p.m.).
27
is activated (the symbol flashes on the
is displayed.