Operator Configuration; Operator Id Enable/Disable; Operator Login Expiration; Operator Management - Abbott ALERE AFINION AS100 Manuel D'utilisation

Configuration

Operator configuration

Touch in the configuration menu to enter the operator configuration menu.

Operator ID enable/disable

Touch in operator configuration menu to enable/disable operator ID.
Select
Select
Select
· To enable this function at least one supervisor is required to be present in the operator list.
· When operator ID verified is enabled, instrument configuration will only be available to the supervisors.
· To log in, the operator ID entered is required to be present in the operator list. See Operator management.
Touch

Operator login expiration

Touch in the operator configuration menu to set automatic logout of the operator.
Enter the number of minutes before automatic logout of operator.
The operator will automatically be logged out after the configured number of minutes after ended test.
Touch

Operator management

Touch in operator configuration menu to enter operator list.
1
Touch
Touch desired operator ID and touch
2
Enter new/edit operator ID
Enter new/edit operator ID and touch
16 characters).
If a barcode reader is connected to the Analyzer, a barcoded operator ID can be entered.
14 | EN
to disable the operator ID function.
to enable operator ID. Any operator ID is accepted.
to enable operator ID with verification.
to accept and return to the configuration menu.
to confirm and return to previous view.
to add new operator.
to delete or to edit the highlighted operator.
to enter. Both letters and numbers can be entered (maximum