Video Memory - Sony VPH-G90E Manuel D'installation

Video Memory

Contents of Video Memory
Specifying the video memory
The video memory stores the aspect ratio and picture control data. This
projector has No. 1 – 10 video memory, and each video memory stores the
same data contents.
If you set the video memory to OFF, the aspect ratio and picture control
data stored in the input memory are loaded.
Item
COLOR TEMPERATURE
WHITE BALANCE
CUSTOM
DYNAMIC PICTURE
V SHIFT
NTSC SET UP
COMPONENT FORMAT
COMB FILTER
DRC LEVEL
PICTURE CONTROL
RGB SIZE
RGB SHIFT
BLANKING
Set the SWITCHER/VIDEO MEMORY/INDEX select switch to VIDEO
MEMORY, and select a video memory number using the SWITCHER/
VIDEO MEMORY/INDEX keys on the remote commander or the control
panel.
For details, see page 48 .
(GB)
Or, select a video memory number from 1 to 10 on VIDEO MEMORY in
the PIC CTRL menu.
For details, see "The PIC CTRL Menu" on page 55
Data
9300/6500/5400/3200/CUSTOM
GAIN: R/G/B
BIAS Coarse: R/G/B
BIAS Fine: R/G/B
GAMMA: R/G/B
(Different data for two screen types)
ON/OFF
WIDE/NARROW
0/7.5
SMPTE·EBU-N10/BETACAM7.5
3D/3LINE
HIGH/LOW
CONTRAST/BRIGHTNESS/COLOR/HUE/
SHARPNESS
Hc/Hf/Vc/Vf
Hc/Hf/Vc
TOP/BOTTOM/LEFT/RIGHT
.
(GB)
137
Adjustments (GB)