Saving The Data To The Service Block - Sony VPH-G90E Manuel D'installation

Saving the Adjustment Data

Saving the Data to the Service Block

132
(GB) Adjustments
When you press the MEMORY key during adjustment, the adjusted data is
stored in the user block. After all the adjustments are completed, we
recommend that you store the adjustment data in the user block to the
service block as service data.
1
Set the projector to the service or expert mode.
For details, see "Menu Modes" on page 51
2
Press the NORMAL key.
3
Press the ENTER key for 5 seconds.
The following display appears.
D o y o u s a v e
a l l d a t a a s
S E R V I C E D A T A ?
SEL: SET:
4
Press the v or V key to select "YES," then press the ENTER key.
The data stored in the user block are saved to the service block as
service data.
How to recall the service data
By recalling the service data, you can easily reset the projector to the
previously adjusted conditions.
To reset to the service data, select "All RESET MODE," "ALL
MEMORY," and "Service Data" following the resetting procedure.
For details, see "Resetting Multiple Items Simultaneously" on page 139
.
(GB)
Y E S
N O
ENTER
EXIT: MENU
.
(GB)