- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
ELECTRIC FRYERS
REPLACING THE HEATING ELEMENT
- raise the heating element in vertical position
- remove the lower protecion panel
- disconnect the heating elements
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
SOSTITUTION OF THE LAMP
- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE WORKING THERMOSTAT.
- Remove the control panel.
- Remove the bulb from its seat on the well.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
19. CLEANING THE INTERIOR
- Check the condition of the inside of the appliance.
- Remove any built-up dirt.
- Check and clean the fumes exhaust system.
20. MAIN COMPONENTS
GAS FRYERS
- Gas valve
- MAIN BURNER
- Pilot burner
- Thermocouple
- Igniter
- Piezoelectric ignition
- Safety thermostat
ELECTRIC FRYERS
- Heating element
- Working thermostat
- Safety thermostat
- Indicator light
25