Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning and maintenance
22/46
4.8
Disassembly for maintenance and
cleaning work
When necessary the acrylic glass panel, the canopy panel or the front panel
can be removed.
DANGER – HIGH VOLTAGE!
You can be killed or injured by an electric shock
During maintenance work there is a risk of touching live
parts and receiving a fatal electric shock.
–
Disconnect device from power supply before opening.
–
Do not reach behind covers and do not open the device
with the device switched on.
–
Refit any safety devices (e.g. switches) after the work
has been completed.
4.8.1
Removing the acrylic panel
–
Remove the screws and remove the washers.
–
Push the bed to the rear with one hand and pull it out of the front guide
with the suction cup.
–
Remove the acrylic glass panel and carefully lay it aside.
Publicité
Chapitres
Table des Matières
