High Pressure Lamps And Filter Panels - SOLTRON XXS Serie Instructions De Service

03/2014 1006322-01
4.9.3

High pressure lamps and filter panels

UV high pressure lamps are used in facial tanners.
WARNING!
Danger of burns from hot lamps and device parts.
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
DANGER!
Fire hazard due to overheated lamps!
Non-approved high pressure lamps can explode. Hot lamp
components can set other parts on fire. People can be killed
or severely injured due to smoke inhalation and fire.
– Only fit the high pressure lamps specified by the
manufacturer.
– Clean the inside of the device regularly. Dust particles
are flammable!
– Open the clamps.
– Lift the filter panel, pull it out of the guide and remove it.
– Unplug the UV lamps.
– Clean the reflector.
Cleaning and maintenance
Operating instructions – 27/46