Mp3 Player Connection - SOLTRON XXS Serie Instructions De Service

03/2014 1006322-01
3.6

MP3 player connection

DANGER!
Danger of hearing damage!
Using earphones or headphones at high volume can result
in permanent hearing damage.
– Do not set the volume too high.
Studio customers can connect their own MP3 player to the device when the
'Stereo Sound System PLUS' accessory is available.
1. Jack plug (JK Part # 4630911001-..) provided for use by the studio op-
erator (2 x 3.5 mm stereo jack plug).
2. MP3 player connection: see the documentation from the manufacturer of
the MP3 player.
Loud music might disturb other studio users!
– Use headphones whenever necessary.
Connect:
– Plug the MP3 cable (stereo jack plug) into the Stereo-Sound system
PLUS.
– Plug the MP3 cable into the MP3 player.
– Select the music title and start in accordance with your MP3 player's
instructions.
If the speakers do not play any music:
– Increase the volume on the MP3 player until the music signal is auto-
matically switched to the Stereo-Sound system PLUS.
– Set the volume on the tanning device to the desired level.
CAUTION!
The heat might damage your MP3 player.
– Do not position the unit so that it receives direct tanning
radiation.
CAUTION!
Cable may be torn off, connectors may be damaged.
– Do not pull on cable when unplugging MP3 player.
Operation
Operating instructions – 15/46